Winner Stucco 25 Kg.
Win Your Dreams With Winnerย
Super Fine Gypsum Plaster
WINNER STUCCO 25 Kg.
WINNER STUCCO is manufactured specifically for thin surface finishing coat application on a wall that is leveled or plastered with sand and cement, to provide a very smooth but sturdy and durable surface. The plaster dries early, giving no room for abrasions or cracking, allowing you complete freedom to decorate the way you wish.
WHAT WE DO!
Unique properties
- ๐๐๐ฌ๐ฒ ๐ญ๐จ ๐๐ฉ๐ฉ๐ฅ๐ฒ : Augmented with Calcium Sulphate Hemi Hydrates, the plaster is known for its great coverage ability, and is easy to work with.
- ๐๐ก๐ซ๐ข๐ง๐ค๐๐ ๐-๐ซ๐๐ฌ๐ข๐ฌ๐ญ๐๐ง๐ญ, ๐ฌ๐ญ๐ซ๐จ๐ง๐ ๐๐จ๐ง๐๐ข๐ง๐ : The plaster has a gradual setting time of 10 to 15 minutes and attains full strength once set, without any shrinkage cracks.
- ๐๐จ๐ฐ ๐๐๐ง๐ฌ๐ข๐ญ๐ฒ ๐๐ง๐ ๐ก๐ข๐ ๐ก๐๐ซ ๐๐จ๐ฏ๐๐ซ๐๐ ๐ : Since it has low density, a 25kg bag of plaster can cover an area of approx 26.5 sq.ft., when applied in 6mm thickness.
- ๐๐จ ๐ฐ๐๐ญ๐๐ซ ๐๐ฎ๐ซ๐ข๐ง๐ ๐ข๐ฌ ๐ซ๐๐ช๐ฎ๐ข๐ซ๐๐ : The plaster does not require curing after application, which helps save water and time.
- ๐๐ข๐ ๐ก ๐๐ง๐๐ฎ๐ซ๐๐ง๐๐ ๐ฅ๐๐ฏ๐๐ฅ : The plaster makes for a resilient but silky smooth surface that can withstand great impact.
- ๐๐จ๐ฐ ๐ญ๐ก๐๐ซ๐ฆ๐๐ฅ ๐๐จ๐ง๐๐ฎ๐๐ญ๐ข๐ฏ๐ข๐ญ๐ฒ : Non-combustible, having very low thermal conductivity (K-Value), the plaster is made to protect the walls from thermal damage.
How to apply
- ๐ช๐๐ก๐ก๐๐ฅ ๐ฆ๐ง๐จ๐๐๐ข is normally applied in 6mm thickness. It is very easy to mix and apply on the rigid surfaces like plastered walls.
- Mark the wall vertically, with level strips, checked with straight edge or line and level by using and aluminium square tube. Mark the highest spots with a minimum 3mm thickness to keep the overall thickness under control.
- Wet the wall suitably, at least 10 minutes prior to the application so that all trapped air can be displaced to allow the plaster to attain good contract and strength with the wall.
- While mixing, take care to add the plaster to the water and not the other way around. Use clean potable water to avoid contamination. Mix both to a workable consistency. Once ready, apply the mix to the walls according to the level strips marking.
- For best results, apply a tight coat with firm pressure, using the trowel.
- Plaster the entire surface in line and level it out. Once it starts to set, complete the application with final stroke of the trowel.
GET IN TOUCH
REQUEST A QUOTE
To get the cost estimation of your house please select from the following: