Winner One Coat 25 Kg.
Win Your Dreams With Winner
High Quality Gypsum Plaster
WINNER ONE COAT 25 Kg.
Specially formulated to be applied directly over solid surfaces such as bare bricks, block walls etc., WINNER ONE COAT is known to give a smooth and durable finish in just one application. You can also out WINNER PERLITE a superior variant of the same. Both products are designed to suit Indian climate and site working conditions.
How to apply
- Both the variants work best when applied with an average thickness of 12-13mm
- Mark the wall vertically, with level strips, checked with straight edge or line and level by using an aluminum square tube. Mark the highest spots with a minimum 5mm thickness to keep the oeverall thickness under control.
- Wet the wall suitably, at least 10 minutes prior to the application so that all trapped air can be displaced to allow the plaster to attain good contract and strength with the wall.
- While mixing, take care to add the plaster to the water and not the other way around. Use clean potable water to avoid contamination. Mix both to a workable consistency. Once ready, apply the mix to the walls according to the level strips marking.
- For best results, apply a tight coat with firm pressure, using the trowel.
- Plaster the entire surface in line and level it out. Once it starts to set, complete the application with final stroke of the trowel.
GET IN TOUCH
REQUEST A QUOTE
To get the cost estimation of your house please select from the following: